Mobile PM service truck
Bulk oil, filters, lubricants, air and electrical tooling, and lighting for overnight work
Scheduled A and B services performed at your yard on your parking cycle.
Running trucks out of Mansfield? We service them at your yard on your parking cycle and keep the records properly — so a roadside breakdown and a compliance audit both stop being surprises. US-287, TX-360, and TX-157 all run through Mansfield, so most calls come off one of those.

Fleet maintenance is delivered by service trucks and technicians rather than by a single class of equipment. What matters for a Mansfield program is whether the unit that arrives can complete the service on your lot instead of scheduling a second visit.
Bulk oil, filters, lubricants, air and electrical tooling, and lighting for overnight work
Scheduled A and B services performed at your yard on your parking cycle.
Bulk fluid delivery with metering and used-oil recovery
Multi-unit service days where handling drums per truck would be the bottleneck.
Manufacturer-level ECM software for engine, chassis, aftertreatment, and ABS
PM services on late-model equipment where a fault code needs reading, not guessing.
Air system tooling, drum and rotor service capability, qualified brake inspector on board
B and C services, annual inspections, and any brake defect certification.
Commercial tire changing, balancing, torque, and casing evaluation
Tire program work batched into a PM day rather than run as separate visits.
Qualified inspector, inspection documentation, and decal issuance
The 396.17 annual, scheduled ahead of expiry instead of after a roadside stop finds it.

One call puts a fleet maintenance unit on the road to you anywhere in Mansfield or out along US-287 and TX-360. Tell us the road and which way you are pointed and we do the rest.
A scheduled program run against intervals and records, not a phone number you call after something breaks. The point of a Mansfield PM contract is that the roadside call never happens — and that when a DOT officer asks for the file, it exists.
The short-interval service — lube, oil and filters, fluid levels, tire pressures and tread, lights, and a walkaround. Most Mansfield fleets run this every 10,000 to 25,000 miles depending on duty cycle, and it is where developing faults get caught cheaply.
Everything in the A service plus brake measurement, slack adjuster travel, air system checks, driveline inspection, and steering and suspension. The service that keeps a Mansfield truck out of the out-of-service category, since brakes drive more OOS violations than any other system.
Coolant and DEF quality testing, differential and transmission service, air dryer cartridge, fuel filters, and the deeper inspection items. Timed to the manufacturer's schedule rather than convenience, because a skipped Mansfield C service shows up as a failure two intervals later.
The 49 CFR 396.17 annual inspection, performed by a qualified inspector and documented on the vehicle. Every commercial vehicle in your Mansfield fleet needs one every twelve months, and the decal or the paperwork must be available on demand.
Rotation, matching, pressure discipline, tread depth tracking, and pull-point decisions made before a casing is scrapped. Tires are usually the second-largest maintenance line in a Mansfield fleet after fuel-related work, and most of that spend is controllable.
Pre-winter and pre-summer passes — batteries and charging under load, coolant protection, air dryer and moisture, block heaters, and DEF handling. In Mansfield the first hard freeze produces a cluster of failures that a September battery test would have prevented.
Driver vehicle inspection reports collected, defects repaired or certified as not needing repair, and the certification signed before the vehicle goes back out. A Mansfield DVIR with an open defect and no repair record is a violation whether or not the truck was safe.
A record per vehicle identifying the unit, listing every inspection, repair, and service performed with dates and mileage. Federal rules require these be kept while the vehicle is under your control and for six months after — the file, not the memory, is what gets audited in Mansfield.
Brake work performed and documented by someone meeting the federal brake inspector qualification standard. This is one of the most commonly missed requirements in a Mansfield audit, because the work was done correctly by someone whose qualification was never recorded.
Watching the roadside inspection violations that feed your maintenance score, and fixing the pattern rather than the ticket. A Mansfield carrier with a rising Vehicle Maintenance BASIC gets inspected more often, which produces more violations — the loop closes on itself.
A truck placed out of service at a Mansfield scale or roadside needs repair before it moves, documentation of that repair, and the violation certified and returned. Handling this badly turns a one-truck problem into an audit finding.
Pulling the maintenance side of a compliance review into one package — annual inspections, DVIRs, repair orders, inspector qualifications. The Mansfield fleets that fail this part rarely failed the maintenance; they failed the paperwork that proves it.
Maintenance cost per mile by unit, so the truck that is quietly consuming the budget becomes visible. Most Mansfield fleets can name their fuel cost per mile instantly and cannot name their maintenance cost per mile at all.
The point where accumulated repair spend on a Mansfield unit passes what a replacement would cost to run. Making this call on data rather than on the last invoice is where a fleet program pays for itself.
Tracking hours out of service and cause, separating scheduled downtime from breakdown downtime. A Mansfield fleet with rising unscheduled downtime has a PM interval problem, not a luck problem.
Catching work that belongs to a manufacturer warranty or an open recall before you pay for it. Missed warranty claims are one of the few pure-refund line items in a Mansfield maintenance budget.
Common filters, pads, lamps, and fluids across the Mansfield fleet so that stocking is possible and a roadside repair does not wait on a part nobody carries.
Every unscheduled Mansfield road call reviewed against the PM record — was the interval wrong, was the item on the checklist, or did somebody sign for an inspection that did not happen. This is the loop that makes a program improve instead of merely repeat.
Technicians and a service truck to your Mansfield lot, working units while they sit. For fleets that park overnight, this converts maintenance downtime into hours the trucks were not earning anyway.
PM scheduled against your dispatch calendar rather than shop hours. A Mansfield truck serviced Saturday is a truck that never missed a load.
Units serviced where they actually sit — a terminal, a customer yard, a truck stop on the lane — for fleets whose trucks rarely come home to Mansfield.
Alignments, major driveline, frame and body work, and anything needing a lift go to a shop. A Mansfield program that pretends everything is mobile produces bad work at the roadside.
When something does break, the Mansfield response is by the operator who holds your maintenance file and knows the unit, not a stranger reading a VIN over the phone.
Tractors, trailers, straight trucks, and light service vehicles under one Mansfield schedule. Most fleets are mixed, and splitting them across vendors is how intervals get missed.
Insurance-current network rescuers with verified compliance, equipment, and live availability status.
Rolling 30-day average dispatch-to-arrival, by service type, across the local rescuer network.
Fleet maintenance is not priced like a road call. A Mansfield program is quoted per unit against a written scope — which services, at which intervals, on which equipment — so the honest answer to "what does it cost" is a description of the structure and the variables, not a single number. Below is what actually moves a quote.
Per-unit cost falls as unit count rises, because a service day amortizes travel across every truck on the lot. A mixed fleet of tractors, trailers, and light vehicles prices per class rather than as one blended rate.
An A-service-only program and a full A/B/C program with annual inspections are different products. Shortening intervals raises the program cost and usually lowers total maintenance cost — that trade is the whole decision.
Service at your yard on your parking cycle prices differently than service scattered across locations or performed on-route. Concentration is the single biggest lever a fleet controls.
Overnight and weekend windows carry a premium and frequently pay for themselves, because a truck serviced outside dispatch hours never left the revenue schedule.
A five-year-old vocational truck in stop-and-go service consumes more PM than a two-year-old highway tractor at the same mileage. Duty cycle predicts cost better than odometer reading.
OEM versus quality aftermarket, and extended-drain versus conventional oil, change both the invoice and the interval. The cheaper filter on a longer interval is sometimes the more expensive choice.
Annual federal inspections, DVIR handling, brake inspector documentation, and maintenance file assembly can be inside the program or billed as performed. Inside is usually cheaper and always more complete.
Programs that include emergency response price higher per unit and lower per incident. Fleets with thin spare capacity generally find the attached coverage cheaper than paying road calls at retail.
Programs are quoted per unit against a written scope. We do not publish a per-truck rate because a rate quoted without the scope beside it is not comparable to anything — including our competitors' numbers.

The same crews that run Mansfield also cover Arlington (9 mi), Grand Prairie (13 mi) and Kennedale (6 mi), so a call from either side of Tarrant County reaches the same desk.
Each service links to local response times, rescuer coverage, and recent dispatched jobs in this metro.
A live map of every fleet maintenance provider in Mansfield metro, with real-time positions, ETAs, and dispatch status, available inside your dashboard.
Sign in to track network rescuers across Mansfield in real time, dispatch jobs, and confirm ETA before the truck rolls.
Each corridor has a dedicated breakdown landing page with service zones, exits, and recent dispatched jobs.

7 exits in Mansfield
The primary freight artery through Mansfield, linking Fort Worth to the southeast toward Waxahachie and the south-Dallas logistics belt. Heavy distribution and manufacturing volume; the SH-360 interchange is a common breakdown zone.

5 exits in Mansfield
The north-south corridor along the east side of Mansfield connecting to Arlington, the entertainment district, and DFW Airport. A primary route for distribution and last-mile freight through the eastern industrial areas.

5 exits in Mansfield
Runs north toward Arlington, a heavy commuter-and-delivery corridor connecting Mansfield's retail and industrial districts to the central Metroplex. Common service calls near the US-287 junction.

4 exits in Mansfield
Continues the Matlock corridor south toward Venus and the rural Johnson County ag belt, a freight and aggregate-hauler route feeding the southern industrial districts.

3 exits in Mansfield
Just north through Arlington and Grand Prairie, the main east-west Metroplex freight artery. Mansfield freight feeds onto it via SH-360 and US-287.

4 exits in Mansfield
Runs southeast toward Cleburne and the I-35W connection, a freight route for the southern Tarrant and Johnson county industrial and quarry traffic.
Patterns observed across recent dispatch data in this metro, by service type and corridor.
The distribution and manufacturing volume on US-287 through Mansfield bunches rigs nose-to-tail, and a 100°F North Texas afternoon finds every worn trailer tire on the superheated pavement. Blowouts cluster on the grades near the SH-360 interchange all summer. Our service trucks carry a full range of commercial sizes to get you legal without a tow.
When a North Texas ice storm rolls in, the elevated SH-360 and US-287 overpasses glaze over first, and rigs that have been parked overnight in the industrial yards hit air-system freezes. Our local mechanics carry methanol-injection kits and air-dryer parts December through February, and most of these calls are roadside fixes rather than tows.
North Texas spring storms drop hail and dump rain on US-287 with little warning, and the sudden slick pavement plus poor visibility produce breakdowns and minor incidents in clusters. Our Mansfield rescuers respond with winch-capable trucks and know which exits give a safe staging spot off the highway.
The federal maintenance rules are the ones that decide a Texas audit, and they are about records as much as wrenches. A Mansfield fleet can be maintained impeccably and still fail a compliance review because the file does not prove it.
Every motor carrier must systematically inspect, repair, and maintain all vehicles under its control. The word doing the work is systematic: an unwritten schedule and a good mechanic do not satisfy it. Carriers must also keep a record for each vehicle identifying it, listing the inspections and maintenance performed with dates, and retain that record for the period the vehicle is controlled plus six months afterward.
Drivers must report defects at the end of each driving day on any vehicle where a defect exists. The carrier must repair any defect affecting safe operation before the vehicle is dispatched again, and must certify on the report that the repair was made or that no repair was needed. An open defect with no certified response is a violation independent of whether the vehicle was actually unsafe.
Each commercial vehicle must pass a comprehensive inspection at least every twelve months, performed by a qualified inspector against the minimum standards in Appendix A. Proof travels with the vehicle — a decal or the inspection report — and must be produced on demand. Roadside inspections performed to the same standard can satisfy the requirement, which is worth knowing before paying for a duplicate.
Annual inspections must be performed by an inspector meeting defined training and experience requirements, and brake work by someone meeting the brake inspector standard. The carrier must retain evidence of those qualifications. This is one of the most commonly missed items in a maintenance audit, because the work itself was competent and the qualification record was never created.
Roadside inspection violations feed the Vehicle Maintenance BASIC in the federal Safety Measurement System, weighted by severity and how recent they are. A score above the intervention threshold raises inspection frequency, which produces more violations, which raises the score. Lights, brakes, and tires generate the bulk of these — and all three are PM checklist items.
Roadside inspectors apply the North American Standard out-of-service criteria, which define the defect thresholds that stop a vehicle where it sits rather than generating a citation. Brake defects dominate. The practical consequence for a fleet is that the threshold is published — a PM program can inspect to it deliberately instead of hoping.
In a compliance review the maintenance file is the evidence. Annual inspection reports, DVIRs with certified repairs, repair orders tied to units, and inspector qualification records are what an investigator reads. Well-maintained trucks with no file look identical, on paper, to neglected ones.

Most Mansfield calls are answered in about 38 minutes. You get a real time before anyone rolls, and the price before the work starts.
Mansfield sits on the booming southern edge of the DFW Metroplex where US-287 and SH-360 funnel distribution and manufacturing freight through southern Tarrant and Johnson counties. The city has grown a substantial industrial and distribution base anchored by Klein Tools and Mouser Electronics, drawing on the highway network between Fort Worth, Arlington, and the Alliance and south-Dallas logistics hubs. US-287 carries heavy long-haul and distribution volume around the clock.
Mansfield is a city in the U.S. state of Texas, and a suburb of the Dallas-Fort Worth metro area. The city is located mostly in Tarrant County, with small parts in Ellis and Johnson counties. Its location is approximately 30 miles from Dallas and 20 miles from Fort Worth, and is adjacent to Arlington. As of the 2020 census, the population was 72,602, up from 56,368 in 2010.
Mansfield's freight economy runs on its growing industrial and distribution base, the manufacturing rigs feeding Klein Tools and Mouser Electronics, the distribution trucks rolling US-287, and the last-mile freight of one of the fastest-growing suburbs in southern Tarrant County. Road Rescue Network's Mansfield rescuers know the US-287 ramps, the SH-360 industrial stretch, and the warehouse districts. When a manufacturing or distribution rig goes down in the growth-driven crush, our response time times beat the regional benchmark.
The mechanics in Mansfield who handle heavy-duty calls know the North Texas weather extremes: 100°F-plus summer afternoons that blister tires on the US-287 pavement and stress cooling systems under loaded trailers, then sudden spring hail and the occasional hard ice storm that freezes the overpasses and triggers air-system problems. Our service trucks carry coolant and hose kits in summer and air-dryer parts and methanol kits in winter because North Texas makes you ready for both.
Whether you're a fleet manager routing manufacturing freight off US-287 or an owner-operator running SH-360 toward the Arlington and Alliance hubs, the nearest verified, insurance-current rescuer in our Mansfield network is one call away. Road Rescue Network's 24/7 operations team handles dispatch, ETA confirmation, and coordination to keep your downtime short.
Reviews collected from fleet customers and drivers after completed service calls in this metro.
“Tractor wouldn't start at the Mansfield Business Park holding up a dock. RRN had a tech out in under 40 minutes, diagnosed a starter, and got us moving. Excellent coordination with the yard.”
“Trailer tire let go on US-287 in July. Service truck had my size and got me legal in about 35 minutes. No tow, fair price, professional. Best in south Tarrant County.”
“Heavy recovery off SH-360 at night. Operator knew the safe staging spots and worked clean. Took a little longer than quoted with the traffic, but solid work overall.”
Fleet maintenance services are a scheduled program that keeps a company's vehicles serviced, inspected, documented, and legal — as opposed to a repair shop you call after something fails. A real program in Mansfield has four parts. First, preventive service at defined intervals: oil and filters, brakes, tires, fluids, and inspection items, usually tiered as A, B, and C services with the deeper work at longer intervals. Second, federal compliance work: the annual 396.17 inspection on every commercial unit, driver vehicle inspection reports collected and defects certified as repaired, and brake work documented by a qualified inspector. Third, records — a maintenance file per vehicle, because in an audit the file is the evidence and a well-maintained truck with no paperwork looks the same as a neglected one. Fourth, the repair work the program generates, done at your yard where possible. What separates a program from a vendor relationship is that it is scheduled and measured: cost per mile, unscheduled downtime, and roadside call frequency should all be moving in the right direction, and if they are not, the intervals are wrong.
Day to day it is three streams of work running at once. The scheduled stream is PM services coming due by mileage, hours, or calendar — lube and filters, brake measurement and adjustment, tire rotation and pressure, air system checks, coolant and DEF testing, and the annual federal inspection. The reactive stream is defects: whatever drivers report on their DVIRs, whatever a technician finds during a PM, and whatever fails between services. The administrative stream is the one fleets underestimate — certifying DVIR repairs, filing repair orders against the right unit, tracking annual inspection expiries, keeping inspector qualification records, and watching the Vehicle Maintenance BASIC for the violation pattern that is quietly raising your inspection frequency. In a Mansfield operation the scheduled stream should be the largest of the three. When the reactive stream grows past it, the program is not preventing anything — it is just paying for breakdowns on a slower schedule.
They overlap and they are not the same thing, which matters when you compare quotes. Fleet maintenance is the physical and regulatory upkeep of the vehicles: services, repairs, inspections, and the maintenance records behind them. Fleet management is the broader commercial function — acquisition and disposal, financing and leasing, fuel programs, telematics and driver behavior, licensing and registration, insurance, and total cost of ownership analysis across the fleet. A large fleet management company will typically include maintenance inside its offering and price the whole bundle per unit per month. A maintenance provider does the upkeep and hands you the data. Which you want depends on where your gap is: if your trucks are serviced but you cannot say what a unit costs per mile, you have a management problem, and if you can produce a spreadsheet but not an annual inspection report, you have a maintenance problem. Buying the wrong one is common and expensive.
Almost always per unit per month, and the number is meaningless without the scope beside it. The structures you will encounter are a flat per-vehicle monthly fee covering a defined service list, a per-vehicle management fee with maintenance billed as performed, a cost-per-mile arrangement on defined equipment, or a full-service lease where maintenance is bundled into the lease payment. What moves the figure is fleet size, vehicle class and age, duty cycle, the service intervals you choose, whether annual inspections and compliance recordkeeping are included, and whether roadside response is attached. When comparing vendors, force the comparison onto the same footing: ask each one for the written scope — which services, at which intervals, on which equipment, with what included — because a lower per-unit price with A services only and compliance billed separately is not cheaper than a higher price with the whole program inside it. It just looks cheaper on the first page.
Follow the manufacturer's schedule as the floor, then shorten it for duty cycle. A highway tractor running long steady miles may go 25,000 miles or more between A services on extended-drain oil, while the same engine in Mansfield stop-and-go work — port drayage, city delivery, vocational service — accumulates engine hours and brake cycles far faster than the odometer suggests and needs a shorter interval. That is why hours or fuel burn is often a better trigger than mileage for an urban fleet. Two dates are fixed regardless of how you set intervals: the federal annual inspection every twelve months on every commercial vehicle, and any state periodic inspection your registration requires, which runs alongside the federal one rather than replacing it. The practical test of whether your intervals are right is your own data — if unscheduled road calls and downtime are rising while PM spend is flat, the interval is too long, and the road calls are already paying the difference.
Often more worth it than for a large one, because a small fleet has no spare capacity. When a ten-truck operation puts one unit out of service, it has lost ten percent of its revenue capability for the day; a two-hundred-truck fleet reassigns the load and moves on. The federal obligations are also identical regardless of size — a three-truck carrier owes the same systematic maintenance, annual inspections, DVIR handling, and records that a national fleet does, and small carriers fail compliance reviews on paperwork far more often than on mechanical condition. Where the math genuinely changes is per-unit cost: a small fleet cannot amortize a service visit across many trucks, so per-unit pricing is higher. The honest comparison is not program cost against zero, it is program cost against what you currently spend on unscheduled repairs, road calls, and downtime — numbers most small fleets have never added up. When they do, the program is frequently already being paid for, just at retail and at the worst possible moment.
Average response time in Mansfield is about 38 minutes for mobile truck repair, faster along the US-287 and SH-360 corridors, a bit longer out toward Venus and the rural Johnson County stretches. We track every call and post real averages.
Yes. Mouser Electronics, Klein Tools, and the Mansfield Business Park are among our most-frequented service zones. For breakdowns inside a facility yard, our dispatchers coordinate gate access with security so our tech can reach the rig and clear your dock.
Every Road Rescue Network rescuer in Mansfield maintains current general liability, automobile liability, workers comp, and where applicable garage-keepers insurance. We re-verify each renewal cycle, and expired coverage means automatic suspension from dispatch.
Yes. We handle national accounts with consolidated invoicing, fleet-card billing, and a single point of contact. Most national fleets onboard in under 48 hours.
24/7/365. There is no after-hours surcharge in our network, rescuers quote the same rate at 3am as at 3pm.
We dispatch routinely to the QuikTrip and NAPA on US-287, the RaceTrac on East Broad (SH-360), the Pilot over in Arlington on I-20, and the Love's down I-35W in Alvarado. Our service trucks know these stops well.
Yes. US-287 through Mansfield and the SH-360 industrial corridor toward Arlington are among our most-frequented service zones. The SH-360 / US-287 interchange is a chronic breakdown spot, and our dispatchers know the current safe pull-offs.
Standard service-call dispatch runs $155-225 in the Mansfield area depending on time of day and service type. Heavy-duty towing starts around $455 for in-area moves. You get a confirmed quote before the truck rolls.
Yes. Several of our Mansfield rescuers run fleet-PM programs with scheduled visits to your yard or terminal. Tell us your fleet size and DOT inspection cadence and we'll match you with the right shop.
If we determine on-scene that the rig can't be fixed roadside in a reasonable window, we coordinate a tow with one of our heavy-duty network rescuers. Many of our service trucks dispatch alongside a wrecker so there's no second response time.

Mansfield runs about 64,274 people and sits in Tarrant County, inside the Dallas-Fort Worth-Arlington Metroplex. We take the call, find the closest crew that actually does this work, and tell you what it costs before anyone turns a wheel.
Sample of recent dispatched service calls in this metro. Customer details removed; locations and response times preserved.
| When | Service | Location | Response |
|---|---|---|---|
| Monday 13:24 CT | Commercial Tire Repair | US-287 near SH-360 | 34 min |
| Sunday 20:51 CT | Heavy-Duty Towing | SH-360 near E Broad St | 46 min |
| Saturday 09:38 CT | Mobile Truck Repair | Mansfield Business Park | 37 min |
| Friday 16:12 CT | Mobile Bus Repair | Mansfield ISD bus yard | 61 min |
| Thursday 07:47 CT | Mobile RV Repair | US-287 near Heritage Pkwy | 58 min |
| Wednesday 02:29 CT | Fuel Delivery | QuikTrip US-287 | 27 min |
| Tuesday 18:05 CT | Mobile Welding | SH-360 Logistics Center | 48 min |
| Monday 11:33 CT | Trailer Repair | Mouser Electronics dock | 43 min |
Coverage in surrounding cities and metros across the same network of verified rescuers.
The same verified network of providers, dispatched 24/7 across every major Texas metro and freight corridor.
Whether the truck is sitting in Mansfield or out toward Kennedale, it is the same phone number and the same crews. One call, day or night.
Deep-dive guide on choosing the right provider, common pitfalls, and what to expect on a service call.
OpenOpen positions at our network rescuers, full-time, part-time, and 1099 contract.
OpenOn-site photos from recent calls, see the work, not just the marketing.
OpenNetwork technicians carry diagnostic equipment, OEM-spec tooling, and common-failure parts for every major fleet maintenance brand on the road. Out-of-stock specifics order in within 24 hours.
Service trucks dispatch routinely to these locations across the metro freight corridors.
High-flow diesel, limited big-rig parking
View Directory Profile →Diesel lanes, fuel
View Directory Profile →
Nearest full truck stop, Tire Care
View Directory Profile →
24/7 diesel, parking
View Directory Profile →Truck parking, restrooms
Local parts houses and diesel suppliers used by network mechanics for time-critical roadside repairs.
Heavy-duty parts, will-call
View Directory Profile →
Truck and trailer parts
View Directory Profile →
Peterbilt dealer, parts + service
View Directory Profile →Major shippers, distribution centers, and industrial freight nodes generating outbound and inbound truck volume.
Electronics distribution HQ, heavy van and parcel freight
Tool manufacturing, outbound freight
Manufacturing and distribution cluster
Distribution and warehouse cluster
Fulfillment center, heavy van and trailer freight
Light manufacturing and warehouse
Last-mile and retail distribution
Three steps from the call to a cleared scene. Same flow whether you call from a fleet desk or the shoulder of an interstate.
Unit list, ages, duty cycles, current intervals, and whatever maintenance records exist. A Mansfield quote written without this is a guess, and the survey routinely finds units that are past an annual inspection nobody was tracking.
Which services, at which intervals, on which units, with what included. This is the document that makes a Mansfield program comparable to another vendor's — and the one most quotes leave out.
Work planned against your parking and load calendar, at your Mansfield yard where possible, overnight or on weekends where that keeps trucks earning.
Network rescuers accept all major credit cards, fleet cards, and consumer payment apps. Confirmed at dispatch.







