Heavy-Duty Towing (Class 7-8)
Rotator and heavy wrecker recovery for loaded tractor-trailers, mixers, dumps and coaches. Underlift towing that keeps the drive axles off the deck so the driveline never has to come apart on the shoulder.
Need a wrecker service in Midlothian? We roll heavy wreckers and rotators for semi truck towing — tractors, loaded trailers, and anything that ended up off the road. You pick where it goes before we hook it. I-35, US-287, and US-67 all run through Midlothian, so most calls come off one of those.

Heavy-duty towing is what you call when the truck cannot roll and a light-duty wrecker cannot legally take it. A Class 7 or 8 tractor, a loaded trailer, a mixer, a coach or a piece of equipment needs a heavy wrecker or a rotator, an operator rated for the tonnage, and the right hookup so the driveline and air system survive the move. The Midlothian recovery map is built around I-35, where a blocking breakdown turns into a lane closure fast.
Every dispatch out of Midlothian starts with the same three questions: what is the gross weight, is it loaded, and is it blocking a lane. Those answers decide whether it is a wheel-lift, a heavy wrecker, or a rotator, and we confirm them before an operator is assigned.
Rotator and heavy wrecker recovery for loaded tractor-trailers, mixers, dumps and coaches. Underlift towing that keeps the drive axles off the deck so the driveline never has to come apart on the shoulder.
Tractor-only, trailer-only, or the full combination moved as one. Air-line and glad-hand hookup handled on scene so a truck with no air still rolls.
Off-road, soft-shoulder, ditch, mud and snow-bank extraction. Straight-line pull or a snatch block rig when the angle is wrong, without dragging the frame.
Uprighting a laid-over tractor or trailer with a rotator, then clearing the scene. We handle the DOT and law-enforcement coordination so the driver is not negotiating it roadside.
Re-securing a shifted load, or transferring freight to a second trailer when the original cannot legally or safely move. Keeps the freight moving instead of sitting in an impound.
Separating stacked or decked tractors, and undecking a unit that cannot be driven off. Standard work on drive-away and dealer-transport freight.
Excavators, loaders, backhoes and lifts moved on lowboy or traveling-axle trailers, including loads that need a permit and a route.
Straightening a jackknifed combination in a live traffic lane, the fastest way to reopen a blocked interstate and stop the secondary-crash risk.
A disabled Class 8 sitting in a live lane in Midlothian is not just a repair problem, it is a liability clock. Every minute it sits raises the odds of a secondary collision and, once law enforcement calls it in, the truck goes to a rotation wrecker and an impound yard you did not choose, at rates you did not agree to. Calling your own heavy wrecker first keeps the unit, the freight, and the destination in your control across Ellis County.
Network heavy units run 25-to-75-ton wreckers and rotators with underlift, wheel-lift and rotating-boom capability, air cushions for rollovers, traveling-axle and lowboy trailers for equipment, and onboard air to get a truck with a dead system rolling. Every operator dispatched is insurance-verified and carries current towing and recovery liability, plus on-hook and garage-keepers coverage.
Tonnage is not the whole story — reach, boom rotation, and under-reach capacity decide whether a unit can actually make the pick. This is what the Midlothian network stages and when each one gets the call.
Rotating boom, dual winches, outriggers, full 360° pick capability
Loaded rollovers, over-the-guardrail and embankment picks, and any recovery where the wrecker cannot get square to the load. The rotator lifts and swings rather than dragging.
Rotating boom, dual winches, extendable under-reach
The metro workhorse for heavy recovery — uprighting, ditch extraction, and blocked-lane clearance where speed matters more than maximum tonnage.
Fixed boom, integrated underlift, wheel-lift grids
Standard Class 8 tractor-trailer and straight-truck tows. Fastest hookup of any heavy unit, so it is first out on a pure breakdown with no recovery component.
Medium-duty boom, wheel-lift, dolly capable
Class 5-7 box trucks, shuttle buses, ambulances, and light equipment — the units too big for a light-duty wrecker and too small to justify a rotator.
Traversing-tail deck, low load angle, deck winch
Wrecked or non-rolling units, forklifts, skid steers, and anything that must be carried rather than towed. The shallow load angle clears low-ground-clearance equipment.
Detachable gooseneck, multi-axle, oversize permit capable
Dozers, excavators, cranes, and machinery over legal deck height. Runs on an oversize permit with the route pre-cleared for bridge and overhead restrictions.
Low-pressure bags, manifold control, capacity in the hundreds of tons
Loaded trailer uprighting where boom lines would crush the sidewall. Deployed alongside a rotator, not instead of one.
Rigging inventory, absorbent stock, lighting, traffic control
Rolls with every major recovery. Carries the snatch blocks, straps, shackles, load cells, spill kit, and scene lighting the wrecker itself does not have room for.

One call puts a heavy-duty towing unit on the road to you anywhere in Midlothian or out along I-35 and US-287. Tell us the road and which way you are pointed and we do the rest.
Class 7 and Class 8 wrecker work across the Midlothian metro — tractor-trailers, straight trucks, motorcoaches, refuse packers, mixers, and heavy equipment. Expand a category to see exactly what the network's heavy operators handle and what rolls to do it.
Full tractor-and-loaded-trailer pulls on an integrated heavy wrecker with underlift and wheel-grid. Drivelines are pulled or axles lifted so the tow does not shred a differential on the way across Midlothian.
Class 6-7 box trucks, stakebeds, and reefer bodies moved on a medium-duty wrecker or heavy rollback. The most common non-accident heavy call in the Midlothian metro is a box truck that will not roll from a delivery stop.
A trailer folded against the tractor is pushed and pulled back into line before anything is towed. Done wrong it bends the fifth wheel and the frame rail — done right the rig often drives away under its own power in a Midlothian work zone.
Overturned tractors and loaded trailers set back on their wheels with rotator boom lines, air cushions, or a combination of both. Load, lean angle, and slope decide the rigging plan before a single line goes tight on a Midlothian shoulder.
Off-shoulder, ditch, mud, snow, and soft-ground extractions using snatch blocks, tree savers, and multi-part line. Pull direction matters more than raw tonnage — a two-part line at the right angle beats a straight pull that digs the Midlothian unit deeper.
Cargo redistributed on-scene or moved to a second trailer when a shifted load puts an axle group over legal weight. Gets the freight moving again instead of stranding it in a Midlothian yard waiting on a permit.
Coaches, school buses, and transit units towed with air-brake caging and rear-engine clearance handled correctly. Passengers are moved to another vehicle before the hook so riders are not standing on a Midlothian roadside.
Packers, front-loaders, and roll-off trucks — often loaded, often leaking, usually blocking a residential Midlothian street. Recovered with containment down first, then hooked.
Concrete mixers with a live drum and loaded dumps carry a high, moving center of gravity. Drum discharge or load transfer usually has to happen before the unit can be safely towed anywhere in Midlothian.
Placarded tankers are staged and rigged with the shipper, the carrier's emergency contact, and responding agencies in the loop. Product transfer, not the tow, is the long pole on a Midlothian tanker incident.
Excavators, dozers, loaders, backhoes, telehandlers, and lifts hauled on a lowboy, RGN, or traversing-tail trailer. Dead iron that cannot roll on gets winched onto the deck rather than dragged across a Midlothian job site.
Engines, ladders, ambulances, plows, and street sweepers moved on priority dispatch. Midlothian municipal units are towed to the department's own shop, not to a storage yard, so they return to service the same day.
A dedicated recovery supervisor owns the rigging plan, the sequence, and the safety brief on any multi-unit Midlothian scene. This is the person insurers, police, and the risk-management desk talk to.
Cones, arrow boards, and shadow-vehicle protection set before the first line goes tight. Recovery inside an active Midlothian closure is worked under whoever controls the lane pattern, agency or contractor.
Diesel, coolant, hydraulic oil, and DEF captured with booms, pads, and absorbent before anything moves. Reportable quantities get called in — a Midlothian recovery that spreads a spill costs far more than the tow.
Wreckage, cargo, and glass cleared and the surface swept so the lane reopens clean. Roadway authorities across Midlothian expect the recovery contractor to hand back a driveable surface.
Low-pressure air bags roll a loaded trailer upright with the load still inside, spreading force across the sidewall instead of concentrating it on two boom lines. The difference between a Midlothian trailer that gets repaired and one that gets scrapped.
Underlift forks, wheel grids, and L-arms rather than chains on painted surfaces or plastic fairings. Lease-return tractors and late-model Midlothian fleet units come off the hook without a damage claim attached.
The rig goes where your maintenance program says it goes — your yard, your dealer, your contracted Midlothian shop — not automatically to the wrecker company's lot.
Fenced, lit, camera-covered yards with room to receive a full tractor-trailer when the destination shop is closed or the unit is evidence-held. Daily heavy rate is quoted up front on Midlothian jobs.
Out-of-metro and interstate relocation of a disabled Class 8 rig on a heavy wrecker or lowboy, priced by loaded mile rather than by the hour once you are clear of Midlothian.
A replacement tractor is put under the loaded trailer so the freight keeps its appointment while the broken unit gets towed separately. The single most valuable option on a Midlothian live-load breakdown.
Photo sets, itemized recovery narratives, scene diagrams, and time logs formatted for an adjuster or a post-accident file. Midlothian carriers use these to close claims without a second site visit.
Bobtail relocation, terminal-to-terminal repositioning, and lender-directed recovery of a Class 8 unit, handled with the same equipment and paperwork discipline as an accident scene in Midlothian.
Heavy towing is not a flat rate and any operator quoting one over the phone has not seen the scene yet. These are the line items that actually appear on a Midlothian heavy recovery invoice, so you can read the estimate before you approve it.
Charged once the unit is dispatched and on scene. Heavy hook-up is a different number than light-duty and is quoted per wrecker class, not per truck.
Per-mile from the scene to the drop, measured loaded. Ask whether it is billed portal-to-portal or scene-to-drop — that single distinction moves long tows the most.
Billed per hour, per unit, from arrival to the moment the casualty is rolling. Recovery time is separate from towing time, which is why a short tow can carry a long bill.
A rotator carries its own hourly rate above a standard heavy wrecker because of what it can reach and lift. Confirm before it rolls whether the scene actually needs one.
The person who owns the rigging plan on a multi-unit scene, billed separately. On a complex recovery this is the line item that keeps the other line items small.
Per man-hour for extra operators. Rollovers, cargo transfers, and containment work all take hands beyond the wrecker driver.
Priced as a system, not by the bag. Cheaper than the trailer it saves whenever the load has to stay in place.
Booms, pads, speedy-dry, and disposal. Passed through at cost on most network jobs, and the roadway authority generally will not release the scene until it is done.
Per day, at a heavy rate, from the day of arrival. Runs until the unit is released — get the destination decided before the hook and this line never opens.
A premium tier, not a surcharge on the base. Most heavy recoveries happen outside business hours, so this is the norm rather than the exception.
Waiting on law enforcement clearance, a bridge authority escort, or a shipper's decision is billable time. Fast decisions on your end directly cut this line.
Oversize permits, bridge-authority credentials, and escort vehicles when the route or the load requires them. Quoted in advance whenever the route is known before dispatch.
Road Rescue Network does not set a member operator's rates. What the network does is make the estimate itemized and comparable before the truck rolls, so an approved heavy recovery does not arrive as a surprise invoice three weeks later.

The same crews that run Midlothian also cover Venus (7 mi), Ovilla (7 mi) and Cedar Hill (8 mi), so a call from either side of Ellis County reaches the same desk.
Each service links to local response times, rescuer coverage, and recent dispatched jobs in this metro.
A live map of every heavy-duty towing and recovery operator in Midlothian metro, with real-time positions, ETAs, and dispatch status, available inside your dashboard.
Sign in to track network rescuers across Midlothian in real time, dispatch jobs, and confirm ETA before the truck rolls.
Each corridor has a dedicated breakdown landing page with service zones, exits, and recent dispatched jobs.

1 exits in Midlothian
Interstate 35 is the limited-access freight spine serving Midlothian. About 8.2 corridor miles fall inside the Midlothian service radius running north-south between Austin, TX and Dallas, TX. Breakdowns on this stretch are worked around the clock by rescuers staged in and around Ellis County.

3 exits in Midlothian
US Route 287 carries regional and through truck traffic across Midlothian, roughly 44.6 miles of it inside the Midlothian service radius running east-west between Fort Worth, TX and Waxahachie, TX. It is the route most local and regional freight uses when it is not on the Interstate system.

1 exits in Midlothian
US Route 67 carries regional and through truck traffic across Midlothian, roughly 33.2 miles of it inside the Midlothian service radius running east-west between Cleburne, TX and Dallas, TX. It is the route most local and regional freight uses when it is not on the Interstate system.

1 exits in Midlothian
Texas Route 360 is a Ellis County connector through Midlothian, about 3.7 miles of it inside the city's service radius running north-south toward Arlington, TX. State-route calls skew toward local delivery, construction, and agricultural equipment.
Patterns observed across recent dispatch data in this metro, by service type and corridor.
A combination that jackknifes or loses air across a travel lane on I-35 stops being a towing job and becomes a traffic-control job. The longer the unit sits, the higher the secondary-collision risk, and once law enforcement calls it in the truck goes to whoever is on the rotation list rather than to a shop you chose. Our Midlothian operators run heavy wreckers with underlift so the combination can be straightened and pulled without breaking the driveline down in a live lane.
Who controls the scene decides how fast the lane reopens. These are the authorities and rules that govern a heavy recovery in and around Midlothian, Texas — worth knowing before you are standing on the shoulder.
Most states now require drivers to move over or slow down for stopped tow trucks displaying amber lights, and authorize responders to clear a disabled or wrecked vehicle from travel lanes without waiting for the owner. Recovery operators work under those authorities, which is why an incident commander can order a tow you did not call.
Crash scenes on public roads are typically assigned from a law-enforcement rotation list, not by the motorist. If a rotation tow has already been dispatched, your preferred operator may only be able to take the second move — from the impound yard to your shop.
A tow you request is consensual and priced by agreement. A tow ordered by police or a property owner is non-consensual and priced under a regulated maximum. The rules that apply to your invoice depend on which one happened.
Federal securement rules apply to a recovered load the same as to a running one. Cargo transferred on scene has to be re-secured to standard before that trailer moves, which is part of why a load shift takes longer than the pull itself.
A recovered unit that exceeds legal dimensions or axle weights needs a permit and, sometimes, a routed escort. That permit is issued to the hauler, so the operator's credentials — not yours — determine whether the move can happen tonight.
Fuel, oil, and coolant releases above a reportable quantity trigger notification to state environmental authorities. The recovery contractor documents containment; the carrier remains the responsible party for the release.

You get a real time before anyone rolls, and the price before the work starts. No motor club runaround and no waiting on a callback.
Midlothian sits where I-35, US-287, and US-67 meet, which is why most breakdown calls here come off a highway rather than a side street. A truck stopped on one of those is a traffic problem before it is a repair problem, so the first thing our dispatcher asks is which road you are on and which way you are pointed.
Midlothian is a city in northwest Ellis County, Texas, United States. The city is 25 miles (40 km) southwest of Dallas. It is the hub for the cement industry in North Texas, as it is the home to three separate cement production facilities, as well as a steel mill. As of the 2020 census, Midlothian had a population of 35,125.
The trucks that cover Midlothian also run Venus, Ovilla, Cedar Hill, and Arlington, out to about 26 miles at Fort Worth. So a call from the edge of Ellis County reaches the same people as one from the middle of town, and you are not handed off to a different dispatcher because of a county line.
Heavy-duty towing in Midlothian starts around $475 for an in-area move, with a hook fee plus a per-mile rate beyond the local radius. A winch-out that does not need a tow is usually billed as a flat recovery call. Rollover, load-shift and rotator work is quoted on scene because the price depends on gross weight, whether the load stays on the trailer, and how long the lane is blocked. You get the number before the truck rolls, and there is no after-hours surcharge.
Yes. Class 7 and 8 tractors, loaded and empty trailers, and the full combination as one unit. Our Midlothian network runs heavy wreckers and rotators with underlift, so the drive axles come off the ground and the driveline does not have to be pulled apart on the shoulder. Box trucks, dumps, mixers, coaches, car haulers and diesel RVs are all in scope.
Often, yes, and it is the cheaper call. Winch-out and extraction covers soft shoulders, ditches, mud, snow banks and yard ruts, where the truck is stuck but undamaged. If the unit can drive away under its own power once it is back on hard surface, you pay for a recovery instead of a tow and a storage bill.
Tell dispatch that first, because it changes everything. A blocking unit is a live safety hazard and it puts you on the clock with law enforcement. If police call it in before you do, the truck goes to whoever holds the rotation contract and ends up in an impound yard at rates nobody negotiated. Calling your own heavy wrecker first keeps the truck, the freight and the destination in your hands.
Yes. I-35 through Ellis County are core recovery corridors, and heavy units stage to reach them 24/7. The same operators run the surrounding towns (Venus, TX, Ovilla, TX and Cedar Hill, TX), so a call from either side of the county reaches the same dispatch desk.
Every operator dispatched in Midlothian carries current towing and recovery liability, on-hook coverage and, where applicable, garage-keepers insurance. We re-verify at every renewal cycle, and an expired policy is an automatic suspension from dispatch. That matters more on a heavy recovery than on any other call, because the exposure is the value of the tractor plus the freight.
Response time across Midlothian typically runs 35-45 minutes for mobile truck repair and heavy-duty towing, faster inside the built-up core and longer on the outlying Ellis County stretches.
I-35, US-287, US-67 and TX-360 are all inside the Midlothian service area. I-35 is the heaviest corridor here, with roughly 8.2 miles inside the city's service radius. Rescuers dispatch to any point on those routes 24/7.
Yes. The Midlothian dispatch area extends through Venus, TX, Ovilla, TX, Cedar Hill, TX, Arlington, TX, Dallas, TX and the rest of Ellis County. Same phone number, same rescuer pool, same 24/7 coverage.
Yes. Every Road Rescue Network rescuer serving Midlothian maintains current general liability, automobile liability, workers compensation, and where applicable garage-keepers insurance. We re-verify every renewal cycle.
Service-call dispatch fees in Midlothian typically run $150-$235 depending on time of day, location, and service type. Heavy-duty towing starts around $475 for in-area moves. Quotes are confirmed before the truck rolls, and there is no after-hours surcharge.

Midlothian runs about 41,352 people and sits in Ellis County, inside the Dallas-Fort Worth-Arlington, TX Metro Area. We take the call, find the closest crew that actually does this work, and tell you what it costs before anyone turns a wheel.
Coverage in surrounding cities and metros across the same network of verified rescuers.
The same verified network of providers, dispatched 24/7 across every major Texas metro and freight corridor.

Whether the truck is sitting in Midlothian or out toward Cedar Hill, it is the same phone number and the same crews. One call, day or night.
Road Rescue Network is actively recruiting verified heavy-duty towing providers in the Midlothian metro. Heavy traffic, real fleet leads, no auction race-to-the-bottom, straight rescuer-to-customer dispatch with confirmed pricing.
We send Midlothian heavy-duty towing calls directly to verified rescuers in your service radius. Apply once. Insurance & DOT verified. Live dispatch, fleet accounts, transparent pricing, no motor-club shave-down.
Deep-dive guide on choosing the right provider, common pitfalls, and what to expect on a service call.
OpenOpen positions at our network rescuers, full-time, part-time, and 1099 contract.
OpenOn-site photos from recent calls, see the work, not just the marketing.
OpenNetwork technicians carry diagnostic equipment, OEM-spec tooling, and common-failure parts for every major heavy-duty towing brand on the road. Out-of-stock specifics order in within 24 hours.
Three steps from the call to a cleared scene. Same flow whether you call from a fleet desk or the shoulder of an interstate.
Unit type, loaded or empty, upright or over, in a lane or on the shoulder, and whether police are already on scene. Those five answers decide whether Midlothian dispatch sends an integrated wrecker or stages a rotator — get them right and the correct truck rolls first.
We match tonnage, reach, and credentials to the scene, not just proximity. A closer wrecker that cannot legally stage on a Midlothian bridge or enter a work zone is not the fast answer — the credentialed one is. You get the unit class and a real arrival time before it leaves.
Containment goes down, the rigging plan is briefed, the unit is recovered, and the roadway is handed back clean. The rig goes where your maintenance program says it goes anywhere in the Midlothian metro, and the photo set and itemized narrative reach your desk the same day.
Network rescuers accept all major credit cards, fleet cards, and consumer payment apps. Confirmed at dispatch.







